LAOS - Laser Open Source

2013-04-07

12:34 LAOS Laser Discussion and support: exhaust system upgrade ? for HPC 302

Hi There the default exhaust system is very low power
It smells really bad in my workshop
What is the best way to u... pieterb

12:30 LAOS Laser Discussion and support: RE: How to connect PWM on the HPC_July_2012_power_supply rev3 board

Hi Hugo
Sorry for my late response ;-)
Still have to revisit this but at the moment a low prio
pieterb

2012-11-27

20:34 LAOS Laser Discussion and support: RE: Stepper motors screaming

Maybe your stepper motors on your machine are wired different then one in the HPC LS3020 ?
That would explain the n... pieterb

2012-11-26

17:34 LAOS Laser Wiki edit: A_list_of_users_with_LAOS_converted_lasercutters (#37)

pieterb

2012-11-24

15:36 LAOS Laser Discussion and support: How to connect PWM on the HPC_July_2012_power_supply rev3 board

Hi there i am still a bit puzzled how to connect te PWM function on my rev3 board
the wiki tells me
J37.1 (Exhaus... pieterb

2012-10-31

13:10 LAOS Laser Wiki edit: A_list_of_users_with_LAOS_converted_lasercutters (#28)

pieterb

2012-09-21

09:53 LAOS Laser Discussion and support: RE: Touch screen user interface

Hi There
Using "old" phone might be quit difficult (unknown hardware/specs etc) but there are some cheap touch scre... pieterb

2012-09-05

21:55 LAOS Laser Discussion and support: RE: visicut workshop @ protospace

Great idea, sadly i have to work that day. Maybe next time ! pieterb

2012-08-14

19:15 LAOS Laser Discussion and support: RE: file stops running

Yes sometimes its get stuck at RUNNING 1% (the display does not get updated very often btw).
Does not happen very of... pieterb

2012-07-23

10:24 LAOS Laser Discussion and support: RE: laser power

Hi Leen,
Did try mdf (4mm) en plywood (5 mm) .
What i do from visicut is check the "Edit Settings before Executin... pieterb