|
;
|
|
; Config file for HPC laser
|
|
; Save on MBED in the root, as "config.txt"
|
|
;
|
|
net.ip 10.0.1.12 ; IP address [xxx.xxx.xxx.xxx]
|
|
net.netmask 255.255.255.0 ; netmask [xxx.xxx.xxx.xxx]
|
|
net.gateway 10.0.1.1 ; gateway
|
|
net.dns 10.0.1.1 ; DNS server
|
|
net.dhcp 0 ; Enable DHCP for IP address [0/1]
|
|
net.port 69 ; Communication socket port number []
|
|
|
|
sys.debug 0 ; debug flags bit0=verbose,
|
|
; bit1=log to serial, bit2=log to file
|
|
sys.autohome 0
|
|
sys.nodisplay 1
|
|
|
|
|
|
laser.pwm.min 100 ; minimum pwm value [%]
|
|
laser.pwm.max 0 ; maximum pwm value [%]
|
|
laser.pwm.freq 1000 ; pwm frequency [Hz]
|
|
|
|
motion.enable 0
|
|
motion.homespeed 150
|
|
motion.speed 250
|
|
motion.accel 500
|
|
|
|
x.pol 1
|
|
y.pol 1
|
|
|
|
; Next values are valid for axis x,y,z and e
|
|
x.scale -158516 ; axis scaling [steps/meter]
|
|
; use negative number to invert direction [1/0]
|
|
x.homedir 1 ; state of the direction signal when homing
|
|
x.home 0 ; home positions [um]
|
|
x.min 5000 ; minimal position [um]
|
|
x.max 310000 ; maximum position [um]
|
|
x.rest 5000 ; rest position [um]
|
|
x.speed 1000 ; maximum speed [mm/sec]
|
|
x.invert 0 ; Invert signal polarity for step signal [1/0]
|
|
|
|
; Now for the Y-axis:
|
|
y.scale -158516 ; axis scaling [steps/meter]
|
|
; use negative number to invert direction [1/0]
|
|
y.homedir 0 ; state of the direction signal when homing
|
|
y.home 200000 ; home positions [um]
|
|
y.min 5000 ; minimal position [um]
|
|
y.max 195000 ; maximum position [um]
|
|
y.rest 195000 ; rest position [um]
|
|
y.speed 1000 ; maximum speed [mm/sec]
|
|
y.invert 0 ; Invert signal polarity for step signal [1/0]
|
|
|
|
|
