Electronics » History » Revision 1
| Next »
Anonymous, 2012-07-12 21:59
- LAOS Mainboard v0.1 has some very visible bugs. One of the is that the LED connectors have no pre-tinned pads on both sides of the board, but only on the top side.
- LAOS Mainboard v0.2 has a LaosLaser LOGO under the SD. Version 0.1 does not.
- LAOS Mainboard v0.3 has no LOGO, but it does say LAOS Board v0.3 just above the MBED.
LAOS I2C panel¶