Project

General

Profile

HPC LS3020 » History » Version 13

bartb, 2012-07-14 21:08

1 1 Anonymous
h1. HPC LS3020
2
3 5 Anonymous
{{>toc}}
4
5 1 Anonymous
!HPC-LS3020.jpg!
6 2 Anonymous
7 4 Anonymous
The HPC LS3020 is manufactured in China and sold by "HPC Laser Ltd.":http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=40 in the UK.
8 5 Anonymous
9
h2. Power supply
10
11 8 Anonymous
The HPC LS3020 is shipped with various types of power supply:
12 5 Anonymous
13
The original supply has a couple of white headers:
14
15 12 Anonymous
p(((. !320px-IMAG0231.jpg!
16 5 Anonymous
17
The supply included in some of the July 2012 units has _green_ headers, some of them combined:
18
19 12 Anonymous
p(((. !320px-Power-LS3020.jpg!
20 3 Anonymous
21 6 Anonymous
The pinouts are described on the [[HPC original power supply]] and [[HPC July 2012 power supply]] pages, respectively.
22
23 3 Anonymous
h2. Coordinates
24
25
The coordinates of an HPC LS3020 laser with LAOS board should be set up as follows:
26
27 2 Anonymous
!HPC-LS3020-coordinates.png!
28 3 Anonymous
29
The "home" position has limit switches at (Xmax,Ymin) which the firmware uses on power-up to figure out where the head is located. Homing can also be performed manually from the I2cPanel.
30 7 bartb
31 9 Anonymous
h2. Modifications
32
33
* Replace the on-off laser power push button by a toggle switch, so the state is visible from afar - [[HPC push button mod]]
34 11 bartb
* A shaky video (7:08) of a comparable machine showing "some enhancement ideas":http://www.youtube.com/watch?v=5F78_zDuaxI: in-line red dot beam combiner, z-axis motor (really protrudes down), second fluorescent tube, slow hinge on the cover and a watercooler-to-be.
35 9 Anonymous
36 7 bartb
h2. Maintenance
37 1 Anonymous
38 13 bartb
* Instructions about "cleaning the lens":http://laserscript.co.uk/phpBB3/viewtopic.php?f=9&t=234
39 1 Anonymous
* A video (6:59) on the "mirror alignment and belt tension adjustment":http://www.youtube.com/watch?v=jLgekkOiMsY&feature=related of a comparable machine.
40 11 bartb
* On the comparable machine's "forum":http://www.fullspectrumengineering.com/forums/viewforum.php?f=3&sid=7de46ba40b08fe566985b4c7220616e1 you might find an answer to other questions like levelling the z-table or installing different focal length lenses.