HPC LS3020 » History » Version 14
bartb, 2012-07-14 21:30
| 1 | 1 | Anonymous | |
|---|---|---|---|
| 2 | 14 | bartb | * Replace the on-off laser power push button by a toggle switch, so the state is visible from afar - [[HPC push button mod]] |
| 3 | * The 'Focus adjustment wheel":http://www.thingiverse.com/thing:18941 . This should be the first thing you cut with your LS3020. You only need two M10 nuts to fasten it. |
||
| 4 | 9 | Anonymous | |
| 5 | |||
| 6 | * A shaky video (7:08) of a comparable machine showing "some enhancement ideas":http://www.youtube.com/watch?v=5F78_zDuaxI: in-line red dot beam combiner, z-axis motor (really protrudes down), second fluorescent tube, slow hinge on the cover and a watercooler-to-be. |
||
| 7 | 11 | bartb | |
| 8 | 9 | Anonymous | h2. Maintenance |
| 9 | 7 | bartb | |
| 10 | 13 | bartb | * Instructions about "cleaning the lens":http://laserscript.co.uk/phpBB3/viewtopic.php?f=9&t=234 |
| 11 | 1 | Anonymous | * A video (6:59) on the "mirror alignment and belt tension adjustment":http://www.youtube.com/watch?v=jLgekkOiMsY&feature=related of a comparable machine. |
| 12 | 14 | bartb | * On the HPC lasers can be found at the Laserscript forum the comparable machine's "forum":http://www.fullspectrumengineering.com/forums/viewforum.php?f=3&sid=7de46ba40b08fe566985b4c7220616e1 you might find an answer to other questions like levelling the z-table or installing different focal length lenses. |