HPC LS3020 » History » Revision 15
Revision 14 (bartb, 2012-07-14 21:30) → Revision 15/24 (bartb, 2012-07-14 22:02)
* Replace the on-off laser power push button by a toggle switch, so the state is visible from afar - [[HPC push button mod]] * Add the "Focus The 'Focus adjustment wheel":http://www.thingiverse.com/thing:18941 for the z-axis. . This should be the first thing you cut with your LS3020. A real enhancement. You only need two M10 nuts to fasten it. * A shaky video (7:08) of a comparable machine showing "some enhancement ideas":http://www.youtube.com/watch?v=5F78_zDuaxI: in-line red dot beam combiner, z-axis motor (really protrudes down), second fluorescent tube, slow hinge on the cover and a watercooler-to-be. h2. Maintenance * Instructions about "cleaning the lens":http://laserscript.co.uk/phpBB3/viewtopic.php?f=9&t=234 * A video (6:59) on the "mirror alignment and belt tension adjustment":http://www.youtube.com/watch?v=jLgekkOiMsY&feature=related of a comparable machine. * On the HPC "Laserscript forum":http://www.laserscript.co.uk/phpBB3 and on lasers can be found at the Laserscript forum the comparable machines' "FS forum":http://www.fullspectrumengineering.com/forums/viewforum.php?f=3&sid=7de46ba40b08fe566985b4c7220616e1 machine's "forum":http://www.fullspectrumengineering.com/forums/viewforum.php?f=3&sid=7de46ba40b08fe566985b4c7220616e1 you might find an answer to other questions like leveling levelling the z-table or installing different focal length lenses.