HPC LS3020 » History » Revision 9
Revision 8 (Anonymous, 2012-07-13 15:18) → Revision 9/24 (Anonymous, 2012-07-13 16:52)
h1. HPC LS3020
{{>toc}}
!HPC-LS3020.jpg!
The HPC LS3020 is manufactured in China and sold by "HPC Laser Ltd.":http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=40 in the UK.
h2. Power supply
The HPC LS3020 is shipped with various types of power supply:
The original supply has a couple of white headers:
!320px-IMAG0231.jpg!
The supply included in some of the July 2012 units has _green_ headers, some of them combined:
!320px-Power-LS3020.jpg!
The pinouts are described on the [[HPC original power supply]] and [[HPC July 2012 power supply]] pages, respectively.
h2. Coordinates
The coordinates of an HPC LS3020 laser with LAOS board should be set up as follows:
!HPC-LS3020-coordinates.png!
The "home" position has limit switches at (Xmax,Ymin) which the firmware uses on power-up to figure out where the head is located. Homing can also be performed manually from the I2cPanel.
h2. Modifications
* Replace the on-off laser power push button by a toggle switch, so the state is visible from afar - [[HPC push button mod]]
h2. Maintenance
* "Cleaning the lens":http://laserscript.co.uk/phpBB3/viewtopic.php?f=9&t=234