LAOS Laser

h1. LAOS CUPS driver installation under Mac OSX 10.7 

{{>toc}}

This was only tested on Mac OSX 10.7 

if you use an other version of Mac OSX just give it a try   

h2. Before you start 

h3. Requirements :

You will need Apples Xcode + Apple's Command Line Developer Tools

read http://www.macports.org/install.php, that should provide you with all you need

h3. Environment:

If you have macports or homebrew installed make shure your PATH variable lists

/usr/bin /bin /usr/sbin /sbin before any other bin or sbin directories

example macports

     $ echo $PATH

     /opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/Users/user/bin/:/Users/user/bin/

$ export PATH="/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/Users/user/bin/:/Users/user/bin/"

if you want to check against which libraries your programm has been linked use

     $ otool -L <notextile><</notextile>binary<notextile>></notextile>

make shure that you don't link against /opt/local/lib, this is a macports library path and shouldn't be used if you want to 

have a native OSX installation

if you run in problems with the linking use 

     $ LDFLAGS="-L/usr/lib" ./configure

that will force the linker to search /usr/lib first.

h2. Installation of dependencies and laos-cups 

h3. ghostscript

read first http://www.ghostscript.com/doc/9.06/Make.htm#Mac_build

     $ wget http://downloads.ghostscript.com/public/ghostscript-9.06.tar.gz

$ tar -xvzf ghostscript-9.06.tar.gz

$ cd ghostscript-9.06

$ ./configure

$ make

$ sudo make install 

h3. tftp-hpa

the OSX tftp client doesn't work with cups-laos, install the extended version

     $ wget http://www.kernel.org/pub/software/network/tftp/tftp-hpa/tftp-hpa-5.2.tar.gz

$ tar -xvzf tftp-hpa-5.2.tar.gz

$ cd tftp-hpa-5.2

$ ./configure --without-ipv6

$ make

backup the original, and install tftp-hpa

     $ sudo cp /usr/bin/tftp /usr/bin/tftp.orig

$ cp tftp/tftp /usr/bin/tftp

h3. pstoedit

after ghostscript is installed pstoedit will compile

     $ git clone -b laos https://github.com/LaosLaser/pstoedit.git

$ cd pstoedit

$ ./configure

$ make

$ sudo make install

h3. cups-laos cups backend + ppd

     $ git clone https://github.com/LaosLaser/Software

$ cd Softwate/cups-laos/src

$ make

$ sudo cp cups-laos /usr/libexec/cups/backend/

$ sudo chmod 755 /usr/libexec/cups/backend/cups-laos   

read https://developer.apple.com/library/mac/#documentation/Printing/Conceptual/UsingPPDFiles/ppd_tasks/ppd_tasks.html  section "Installing PPD Files" 

     $ sudo mkdir /Library/Printers/PPDs/Contents/Resources/en.lproj

$ sudo cp CUPS-LAOS.ppd /Library/Printers/PPDs/Contents/Resources/en.lproj

$ sudo chmod 755 /Library/Printers/PPDs/Contents/Resources/en.lproj/CUPS-LAOS.ppd

h2. Install the laser cutter under CUPS 

now you can add a laser cutter eader trough http://localhost:631 

or OSX System Preferences -> Printer -> + -> cups-laos

h2. Notes

h3. Bug: device URI can't be changed while installing laser cutter in CUPS admin panel 

Connection is allways "cups-laos://127.0.0.1:69/laos" and can only be changed 

by editing /etc/cups/printers.conf

search for

        DeviceURI cups-laos://127.0.0.1:69/laos

and replace 127.0.0.1 with the destination of your laser cutter

h3. "wget: command not found"

if you are not using macports or homebrew but have already Apples Xcode + Apple's Command Line Developer Tools installed,

you can install wget with 

     $ curl -o wget-latest.tar.gz http://ftp.gnu.org/gnu/wget/wget-latest.tar.gz

$ tar xzf wget-latest.tar.gz

$ cd wget-x.y.z # Verzeichnis, das im latest Archiv verpackt war, z.B. wget-1.11.4

$ ./configure

$ make

$ sudo make install

otherwise just download the sources with your browser