Setting up electronics and network for the HPC LS3020 » History » Revision 1

Revision 1/9 | Next »
Anonymous, 2012-07-16 16:04

Connect the electronics and hook it up to your network

HPC LS3020

There are different types of power supply and different ways to hook up the stepper motors and limit switches:

The original power supply has these connectors:

The new July 2012 version has these connectors:

The stepper motors and limit switches were originally connected via separate cables, but the July 2012 batch has 12-pin flat cable, combining the X stepper and limit switches in one:

The combination new power supply with flat cable is described on the HPC LS3020 connections page.

Updated by Anonymous about 11 years ago · 1 revisions