Project

General

Profile

VisiCut Recipe » History » Version 4

bartb, 2012-07-13 22:42

1 1 bartb
h1. Recipe
2
3
This is how to include a new material in the Materials List with your own settings. 
4
5 4 bartb
Say Beech of 0.8 mm, with setting of Speed 100 and Power 70 at 2500 Hz _(these are not the real settings)_.
6 1 bartb
7
Go to Edit->Advanced->Manage Materials...
8
9 2 bartb
p=. !manage.png!
10
11 1 bartb
Then select your lasercutter
12
13 2 bartb
p=. !laoshpc.png!
14
15 4 bartb
A list will appear with all the materials VisiCut already knows.
16 1 bartb
17 2 bartb
p=. !materials.png!
18
19 1 bartb
Beech is not yet in the list, so we click + on the right. A new dialog appears:
20
21 2 bartb
p=. !unnamedmaterial.png!
22
23 3 bartb
Here we enter the information we have for Beech 0.8 mm. Name Beech 0.8 mm, description thin wood or so. Thickness is in our case 0.8 mm. Now the dialog looks like this and we have to enter the parameters, to start with *Cut Line*. So select 'Cut Line' and press Edit.
24 1 bartb
25 2 bartb
p=. !beech.png!
26
27 1 bartb
A new dialog appears, where you can enter the values for a line to be cut. 100 % speed, 70% power at 2500 Hz. Click Save.
28
29 2 bartb
p=. !settingsbeech.png!
30
31 4 bartb
In case we know more parameters, we can enter them. *Engrave Line* aka Marking Mode is a line generated from a vectorline, in fact a not deep cut line. *Engrave Drawing* is Raster Mode for graphics work. *Engrave Photo* is Raster Mode for photographs.
32 1 bartb
Click Save and the table will have a new entry for Beech 0.8
33 2 bartb
34
p=. !settingsbeech2.png!