Wiki » History » Version 17
Anonymous, 2012-07-12 22:37
| 1 | 1 | jaap | h1. LAOS Laser |
|---|---|---|---|
| 2 | |||
| 3 | {{>toc}} |
||
| 4 | |||
| 5 | 10 | Anonymous | !>LaOSLogo.png! |
| 6 | 9 | Anonymous | |
| 7 | 8 | Anonymous | This site is about an Open Source laser engraver/cutter controller system, both hardware and software. Further info can be found on the [[Rationale and background]] page. The site was created in 2010 by Jaap Vermaas and Peter Brier, and is now being taken further with the help of many [[Contributors]]. |
| 8 | 1 | jaap | |
| 9 | 17 | Anonymous | A laser cutter consists of several components, further described on the [[Overview]] page - this site focuses on units such as the [[HPC LS3020]], in combination with the LAOS electronics. For a full list, see the [[Laser Cutters|Supported lasers]] so far. The current electronics are [[LAOS Mainboard v0.3]] and [[i2cpanel vx.x]] - older versions are listed at the end of this page. |
| 10 | 1 | jaap | |
| 11 | 7 | Anonymous | > Tip: for quick navigation, see the tabs at the top of each page on this site. |
| 12 | 1 | jaap | |
| 13 | h2. HowTo's |
||
| 14 | |||
| 15 | * Figure out what you'll need and where to get it |
||
| 16 | 2 | jaap | * Prepare your laser cutter for use with LAOS (including first firing test) |
| 17 | * Assemble the LAOS electronics boards |
||
| 18 | 1 | jaap | * Install firmware and verify proper operation |
| 19 | * Connect the electronics and hook it up to your network |
||
| 20 | 4 | jaap | * Install required software on your Windows, Mac, or Linux pc |
| 21 | 1 | jaap | * Troubleshooting - Where to get help - Contributing to this wiki |
| 22 | |||
| 23 | h2. Reference |
||
| 24 | |||
| 25 | 13 | Anonymous | h3. [[Laser cutters]] |
| 26 | 1 | jaap | |
| 27 | 14 | Anonymous | * [[HPC LS3020]] |
| 28 | 1 | jaap | * Materials and settings |
| 29 | |||
| 30 | 12 | Anonymous | h3. [[Electronics]] |
| 31 | 1 | jaap | |
| 32 | 11 | Anonymous | * [[LAOS Mainboard v0.3]] |
| 33 | 1 | jaap | * I2cpanel vx.x |
| 34 | |||
| 35 | 13 | Anonymous | h3. [[Software]] |
| 36 | 1 | jaap | |
| 37 | 15 | Anonymous | * [[LAOS firmware]] |
| 38 | 1 | jaap | * LAOS CUPS driver |
| 39 | * VisiCut |
||
| 40 | |||
| 41 | h3. Older information |
||
| 42 | |||
| 43 | ... |
||
| 44 | |||
| 45 | h2. Useful links |
||
| 46 | |||
| 47 | ... |