Wiki » History » Version 30
bartb, 2012-07-13 16:50
| 1 | 23 | bartb | h1. Add a new material setting |
|---|---|---|---|
| 2 | 1 | jaap | |
| 3 | 27 | bartb | Suppose you want to include a new material in the Materials List. Say Beech of 0.8 mm, with setting of Speed 100 and Power 70 at 2500 Hz. |
| 4 | 1 | jaap | |
| 5 | 23 | bartb | Go to Edit->Advanced->Manage Materials... |
| 6 | 1 | jaap | |
| 7 | 30 | bartb | p=. !manage.png! |
| 8 | 24 | bartb | |
| 9 | 1 | jaap | Then select your lasercutter |
| 10 | 27 | bartb | |
| 11 | 1 | jaap | p=. !laoshpc.png! |
| 12 | 27 | bartb | |
| 13 | A list will appear with all the materials Visicut already knows. |
||
| 14 | |||
| 15 | p=. !materials.png! |
||
| 16 | |||
| 17 | Beech is not yet in the list, so we click + on the right. A new dialog appears: |
||
| 18 | |||
| 19 | p=. !unnamedmaterial.png! |
||
| 20 | 28 | bartb | |
| 21 | 29 | bartb | Here we enter the information we have for Beech 0.8 mm. Name Beech 0.8 mm, description thin wood or so. Thickness is in our case 0.8 mm. Now the dialog looks like this and we have to enter the parameters, to start with 'cut line'. So select 'cut line' and press Edit. |
| 22 | |||
| 23 | |||
| 24 | 28 | bartb | |
| 25 | |||
| 26 | |||
| 27 | Wir tragen hier nun die Informationen ein, die wir über Buche 0,8mm haben: Name ist wohl Buche 0,8mm, als Description geben wir dünnes Holz oder so ein. Thickness beschreibt die Materialstärke in unserem Fall also 0.8mm. Der Dialog sollte nun wie folgt aussehen und wir wollen die Parameter des Materials als nächstes bearbeiten. Konkret: Cut Line soll bearbeitet werden. Also Cut Line in der Liste auswählen und den Edit Knopf drücken: |