config.txt - LAOS Laser - LAOS - Laser Open Source

K40-III » config.txt

darrenp, 2012-12-03 15:49

+      ;
       ; Config file for HPC laser
       ; Save on MBED in the root, as "config.txt"
+      ;
       net.ip 192.168.5.51		; IP address [xxx.xxx.xxx.xxx]
       net.netmask 255.255.255.0	; netmask [xxx.xxx.xxx.xxx]
       net.gateway 192.168.5.254	; gateway
       net.dns 8.8.8.8		; DNS server
       net.dhcp 0			; Enable DHCP for IP address [0/1]
       net.port 69			; Communication socket port number []
       sys.debug  0			; debug flags bit0=verbose,
       				; bit1=log to serial, bit2=log to file
       sys.autohome 1
       sys.nodisplay 0
       laser.pwm.min  100   ; minimum pwm value [%]
       laser.pwm.max  0     ; maximum pwm value [%]
       laser.pwm.freq 1000  ; pwm frequency [Hz]
       motion.enable 0
       motion.homespeed  150
       motion.speed 250
       motion.accel 500
       x.pol 1
       y.pol 1
       x.scale -158516
       				; use negative number to invert direction [1/0]
       x.homedir 1			; state of the direction signal when homing
       x.home 0			; home positions [um]
       x.min 0				; minimal position [um]
       x.max 330000			; maximum position [um]
       x.rest 0			; rest position [um]
       x.speed 150			; maximum speed [mm/sec]
       x.invert 0			; Invert signal polarity for step signal [1/0]
       y.scale 158516
       y.homedir 1
       y.home 240000
       y.min 0
       y.max 240000
       ;y.max 240000
       y.rest 230000
       y.speed 150
       y.invert 0

(1-1/9)