Actions
Bug #75
closed
horizontal move with "laser on" before 2nd cut of job
Start date:
2013-03-03
Due date:
% Done:
0%
Estimated time:
Description
After starting the second cut of a job (through the run menu option), a horizontal move will be made while the laser is turned on with full power. This move can be avoided by homing first...
firmware compiled with git hash f1e3972
Updated by peter over 11 years ago
Seems to be related with a change in visicut (it is now switching the exhaust ON/OFF in the file format). This is not correctly handled
in the firmware. Need to fix in the firmware.
Updated by hugomeiland over 11 years ago
We are working with the nightly build of Visicut from end of december 2012;
Updated by hugomeiland over 11 years ago
also in this firmware, the speed settings from visicut are not used....
Updated by peter over 11 years ago
this should fix the issue: https://github.com/LaosLaser/Firmware/blob/issue_73_75/laoslaser-9-3-2013.bin
Updated by hugomeiland over 11 years ago
- Status changed from New to Resolved
works fine, thanks!; could this firmware be tagged version 3.1 in GitHub?
Actions