Firmware » History » Revision 2
« Previous |
Revision 2/29
(diff)
| Next »
bartb, 2012-08-13 22:39
LAOS firmware¶
Firmware¶
The Firmware is the code that controls the motor and laser. It is installed on the mainboard. Installation of the firmware on the controller, and configuration of the firmware for your system is described here. To test the hardware, a separate test program is written. Its use is described here
The firmware uses a simple instruction language that is described Here. These instructions are used to instruct the laser to move, cut and mark.
Download compiled versions¶
The compiled firmware file is here (save to your MBED):
https://tuxic.nl/laos/firmware/mbed/laoslaser/laoslaser_LPC1768.bin
The configuration files are here (download, modify for your machine, and save on MBED):
Updated by bartb over 12 years ago · 2 revisions