Install firmware and verify proper operation¶
- Connect mbed via usb to your laptop, when it mounts, copy [[https://github.com/LaosLaser/Firmware/blob/master/iotest-2015-09-16.bin]] on the mbed drive.
- Unmount the mbed drive, and then test io ports looking at the console terminal for feedback
- Once the io works fine, replace the bin file with the latest build [[https://github.com/LaosLaser/Firmware/blob/master/laoslaser-2015-03-18.bin]], remember to save raw file, do not right click "dowload as", took me 1 day to figure out.
- Boot up and installation of firmware is done.