Install firmware and verify proper operation¶

Process¶

Connect mbed via usb to your laptop, when it mounts, copy [[https://github.com/LaosLaser/Firmware/blob/master/iotest-2015-09-16.bin]] on the mbed drive.
Unmount the mbed drive, and then test io ports looking at the console terminal for feedback
Once the io works fine, replace the bin file with the latest build [[https://github.com/LaosLaser/Firmware/blob/master/laoslaser-2015-03-18.bin]], remember to save raw file, do not right click "dowload as", took me 1 day to figure out.
Boot up and installation of firmware is done.

Files (0)