Project

General

Profile

Actions

LAOS Mainboard v03 » History » Revision 2

« Previous | Revision 2/30 (diff) | Next »
Anonymous, 2012-07-12 21:08


LAOS Mainboard v0.3

Common parts

These parts are needed for every board, no matter the type of laser it will be used for.

Number Component RS Part No. RS Price Farnell Part No. Farnell Price Comment
1 ARM mbed LPC1768 Module 703-9238 € 49,53 1761179 €49,73 Mbed
1 Hirose DM1B-DSF-PEJ 685-0788 € 2,22 1764373 €2,65 reverse SD Memory Card connector
2 DIL socket,0.3in pitch, 16 pin 402-771 € 0,18 1077315 €2,17
2 Harwin M20-7832046 681-6851 € 5,31 9688862 € 7,07 Mbed Footprint
1 MAGJACK SI-60002-F 741-8477 € 4,38 1137981 €6,27 Network connector (with LEDs: Farnell:1137983)
2 IC KB847 619-2026 € 1,96 2001656 €1,37 (5 pcs min)
1 2GB SD card 539-7804 € 9,40 SD Card (cheaper at Mycom: € 4,99)
1 100R resistor 707-7587 € 0,02
1 120R resistor 707-7599 € 0,02
4 330R resistor 707-7622 € 0,02
15 1K resistor 707-7666 € 0,02
2 2K2 resistor 707-7690 € 0,02
11 10K resistor 707-7745 € 0,02
5 100nF capacitor 721-5240 € 0,07
1 22nF capacitor 721-5268 € 0,12
1 100 uF capacitor (ELCO) 520-0996 € 0,28 min. voltage: 12V
1 1000 uF capacitor (ELCO) 520-1090 € 1,31 min. voltage: 25V (depending on your motor voltage)
1 Red LED 708-2753 € 0,09
1 Green LED 708-2756 € 0,11
1 Yellow LED 708-2769 € 0,11
1 Laos PCB Rev 0.3 € 15,00 Available from our WebShop

Updated by Anonymous over 11 years ago · 2 revisions