Materials and settings » History » Revision 1

Revision 1/5 | Next »
bartb, 2012-07-15 17:29
included settings by HPC for LS3020

Materials and settings¶

Table for LS3020 from HPC
Cut frequency always 500, for perspex (=acrylic) 5000

	Power	Speed	Power	Speed
Material	Cut vector		Engrave raster
Acrylic 2mm		100	21	200
Acrylic 3mm	6	100	21	200
Acrylic 4mm		100	21	200
Acrylic 5 mm	3	100	21	200
Acrylic 10 mm	1	100	21	200
Triplex 1,5 mm	8	100	17	200
Triplex 3 mm	5	100	17	200
Triplex 4 mm		100	17	200
Triplex 5 mm	2	100	17	200
Triplex 6 mm	1	100	17	200
MDF 3 mm	5	100	25	200
MDF 4 mm	4	100	25	200
MDF 6 mm		100	25	200
Corr. Cardboard 3 mm	12	100	20	200
Hardboard 3 mm	3	100	20	200
Paper	20	20	15	200
Card	25	40	20	200
Mount Board	12	100	20	200
Engraving Laminate	15	80	21	200
Funky Foam	25	25	no engrave

Tip:
to get a better result from engraving: slow the speed down

Files (0)