Project

General

Profile

Actions

Moshi-to-laos-conversion-K40-III » History » Revision 2

« Previous | Revision 2/7 (diff) | Next »
DeanoC, 2013-03-14 19:45


Moshi to LAOS conversion K40-III

We brought a cheap Chinese 40W Laser Engraver/Cutter about 6 months ago, and have struggled with its Moshi-draw software until decided to convert it to a LAOS board based Laser Cutter. This is a record of the issues we faced during the conversion.

The hardware we started with:

Updated by DeanoC over 11 years ago · 2 revisions