Setting up electronics and network for the HPC LS3020 » History » Version 1
Anonymous, 2012-07-16 16:04
| 1 | 1 | Anonymous | h1. Connect the electronics and hook it up to your network |
|---|---|---|---|
| 2 | |||
| 3 | h2. [[HPC LS3020]] |
||
| 4 | |||
| 5 | There are different types of power supply and different ways to hook up the stepper motors and limit switches: |
||
| 6 | |||
| 7 | The original power supply has these connectors: |
||
| 8 | |||
| 9 | !320px-IMAG0231.jpg! |
||
| 10 | |||
| 11 | The new July 2012 version has these connectors: |
||
| 12 | |||
| 13 | !320px-Power-LS3020.jpg! |
||
| 14 | |||
| 15 | The stepper motors and limit switches were originally connected via separate cables, but the July 2012 batch has 12-pin flat cable, combining the X stepper and limit switches in one: |
||
| 16 | |||
| 17 | !HPC-flat-cable-pinning.jpg! |
||
| 18 | |||
| 19 | The combination *new power supply* with *flat cable* is described on the [[HPC LS3020 connections]] page. |