Project

General

Profile

VisiCut » History » Version 27

bartb, 2012-07-13 20:45

1 25 bartb
h1. LaOS VisiCut User Guide
2 1 bartb
3 5 bartb
{{>toc}}
4
5 13 Anonymous
!>visicut-logo.png!
6 12 Anonymous
7 26 bartb
*VisiCut* is a stand-alone control program that accepts a file to be cut out from any 2D drawing program to. It is made by "Thomas Oster":http://visicut.wordpress.com
8 1 bartb
9
10 24 bartb
VisiCut is not a drawing program: once you have sent your drawing to VisiCut you can no longer modify it, but still scale it. In VisiCut you specify the settings for your cutter and for the material to cut. 
11 1 bartb
12
(LaOS can also be used with a printer driver inside a 2D drawing program like Inkscape, as described elsewhere in this wiki).
13
14
15 5 bartb
16 24 bartb
h2. Installing VisiCut
17 5 bartb
18 1 bartb
Available for all platforms from http://visicut.wordpress.com/download and install.
19
20 5 bartb
h2. Selecting the HPC
21 1 bartb
22 24 bartb
* Open the VisiCut app and go to File -> Advanced -> Manage Lasercutters... and select LAOS HPC. 
23 1 bartb
* Click Edit. A window appears with settings for the HPC. 
24 21 bartb
* If you do not see the following values in the window edit them and Save
25 3 bartb
26 1 bartb
p=. !SettingsHPC.png!
27
28 24 bartb
* On the VisiCut screen select LAOS HPC as lasercutter. Below that you might see dimensions like 300 x 600 mm, but those have to do with the materials settings, not the bed setting, so do not worry.
29 1 bartb
30 5 bartb
h2. First move
31 1 bartb
32 24 bartb
* Now draw something - a square will be fine - in your drawing program, save it as a .svg file and open it with File -> Open in VisiCut. It will appear in the colored window.
33 1 bartb
* If you do not see it, click 'Everything => Cut Line' in the mapping box and verify that 'Cutting' in the topleft is tacked.
34 3 bartb
35 1 bartb
p=. !cutline.png! 
36
37
* You can move the square around and scale it. Position it some 10 cms from the left and top. 
38
* Now leave the lid of your lasercutter open and click Execute. The job will be sent to the cutter. 
39
* Neglect the pop-up window about closing the lid etc., just hit OK. The laser head should now draw the square.
40
41 5 bartb
h2. Setting speed and power
42 4 bartb
43 2 bartb
* Before you can cut you need the set the power and the speed for the selected material, there are some predefined settings under Material.
44 1 bartb
* You can also experiment with settings on the go.
45 2 bartb
* Then tack ‘Edit settings before Executing” and hit ‘Execute' again. 
46
* A window will pop up where you can edit the settings for your specific material. 
47 1 bartb
48
49
p=. !edit.png!
50
51
52
* OK will sent your job to the printer. And you can choose to keep this setting if you wish.
53 27 bartb
* Material settings for the LS3020 are in the (future) Laser Cuttings section
54 5 bartb
55
56 6 bartb
57
h2. How to use VisiCut with Inkscape
58
59
This "tutorial":http://hci.rwth-aachen.de/visicut_and_inkscape explains how to create SVG files with Inkscape that have different layers.
60
This "second tutorial":http://hci.rwth-aachen.de/visicut_cut_and_engrave how to open files with cut and engrave layers with VisiCut.
61
62
h2. Printing directly from Inkscape
63
64 10 bartb
A plug-in to directly cut from Inkscape can be installed following these "instructions":http://hci.rwth-aachen.de/visicut_inkscape_plugin. A Lasercut Path will be added under the Extensions tab. 
65 6 bartb
66 7 bartb
p=. !openwithvisicut.png!
67 1 bartb
68 24 bartb
If you want to cut, be sure VisiCut is running before you select Open with VisiCut.
69 7 bartb
70 22 bartb
h2. Adding new material settings
71 15 bartb
72 23 bartb
Most likely that you will want to include materials in the Materials List with your own settings. Here is the [[recipe]] to do so.