Project

General

Profile

Wiki » History » Version 66

hugomeiland, 2013-02-20 08:39

1 32 Anonymous
h1. LAOS Laser
2 1 jaap
3 32 Anonymous
{{>toc}}
4 1 jaap
5 32 Anonymous
!>LaOSLogo.png!
6 1 jaap
7 50 Anonymous
This site is about an Open Source laser engraver/cutter controller system, both hardware and software. Further info can be found on the [[Rationale and background]] page. The site was created in 2010 by Jaap Vermaas and Peter Brier, and is now being taken further with the help of other [[Contributors]].
8 1 jaap
9 49 Anonymous
A laser cutter consists of several components, as described on [[How does a laser cutter work?|this page]] - this site focuses on units such as the [[HPC LS3020]], in combination with the LAOS electronics. For a full list, see the [[Laser Cutters|Supported lasers]] so far. The current electronics are [[LAOS Mainboard v0.3]] and [[LAOS I2C panel v0.3]] - older versions are listed on the [[Electronics]] page.
10 1 jaap
11 61 jaap
%{color:red}Warning: If you have Rev4 board, read http://redmine.laoslaser.org/issues/68%
12 61 jaap
13 52 Anonymous
> Tip # 1: for quick navigation, see the tabs at the top of each page on this site.
14 52 Anonymous
> Tip # 2: click on the section titles below for a list of all the pages related to that section.
15 1 jaap
16 46 Anonymous
h2. [[HowTo's]]
17 1 jaap
18 39 Anonymous
* [Figure out what you'll need and where to get it]
19 41 Anonymous
* [Prepare your laser cutter for use with LAOS] (including a first firing test)
20 56 jaap
* [[Assembling the LAOS electronics boards]]
21 39 Anonymous
* [Install firmware and verify proper operation]
22 44 Anonymous
* [[Connect the electronics and hook it up to your network]]
23 41 Anonymous
* [Install required software on your Windows, Mac, or Linux PC]
24 47 Anonymous
* [[Troubleshooting]] - [Where to get help] - [Contributing to this wiki]
25 32 Anonymous
26 39 Anonymous
h2. [[Laser cutters]]
27 1 jaap
28 38 bartb
* [[How does a laser cutter work?]]
29 32 Anonymous
* [[HPC LS3020]]
30 60 darrenp
** [[Materials_and_settings]]
31 58 darrenp
* [[K40-III]]
32 60 darrenp
** [[K40-III_Material_settings]]
33 57 bartb
* [[LaOS on the road]]
34 54 peter
* [[A list of users with LAOS converted lasercutters]]
35 1 jaap
36 39 Anonymous
h2. [[Electronics]]
37 1 jaap
38 53 peter
* [[What is the electronics for?]]
39 32 Anonymous
* [[LAOS Mainboard v0.3]]
40 36 Anonymous
* [[LAOS I2C Panel v0.3]]
41 29 bartb
42 39 Anonymous
h2. [[Software]]
43 31 bartb
44 1 jaap
* [[Software overview]]
45 54 peter
* [[LAOS firmware]]
46 45 Anonymous
* [[LAOS configuration file]]
47 62 jaap
* [[SimpleCode]] (laos gcode file format)
48 40 jaap
* [[LAOS CUPS driver]]
49 33 Anonymous
* [[VisiCut]]
50 28 bartb
51 65 hugomeiland
h2. [[Future directions]]
52 66 hugomeiland
* [[RTOS]]
53 65 hugomeiland
54 51 Anonymous
h2. Additional information
55 1 jaap
56 51 Anonymous
* [Historical notes]
57 34 Anonymous
* original wiki -  http://wiki.laoslaser.org/index.php/OpensourceLasercutterdriver
58 55 jaap
* [[Links]]