arjan
- Login: arjan
- Email: arjan.dijk@gmail.com
- Registered on: 2014-01-17
- Last connection: 2015-10-22
Issues
| open | closed | Total | |
|---|---|---|---|
| Assigned issues | 0 | 0 | 0 |
| Reported issues | 0 | 0 | 0 |
Projects
| Project | Roles | Registered on |
|---|---|---|
| LAOS Laser | Developer | 2014-05-09 |
Activity
2015-10-22
-
00:03 LAOS Laser Discussion and support: No response after trying to work with PWM
- I tried to use PWM on a LS3020. After cutting the cables loose from the podmeter the board will not boot. There is cu...
2015-10-10
-
- I also tried to use PWM. After cutting the cables loose from the podmeter the board will not boot. There is current g...
2015-07-31
-
- Yeah, using 2 different pololus. I adjusted the scale on the mbed. Now everything works ok. Thanks Spruiguin Peter an...
2015-07-29
-
- That could be the answer. I changed the pololu's. I used them in a different project where I burned one. Afterwards I...
-
- i found a way to get a LGC file. Just run a local TFTP server. The debug option is not in my visicut.
Dropping the...
2015-07-27
-
- Thanks guys,
I will check it when I'm at home. If its true what you mentioned, then I don't know how I missed it....
2015-07-26
-
- Hello,
It has been a while since I touched my ls3020 laser, but I recently started again with visicut. The scale i...
2014-05-14
-
- Yes I did. the -I dash in TFT means binary. http://technet.microsoft.com/en-us/library/ff698993.aspx
Any other hin... -
- So I picket up this project again. used TFTP implementation of windows and used "tftp -i 192.168.1.9 PUT test.txt" to...
2014-02-12
-
- Yes I do. I succeeded in running the machine from Visicut, but I want to use my CAM software to user things like radi...
Also available in: Atom