LAOS - Laser Open Source

2013-01-08

23:19 LAOS Laser Bug #70 (New): K40 Y-stepper docs confusing

I'm trying to test my K40 with LaOS by wiring up the Y stepper and using the iotest firmware.
But, the documentation...

2013-01-06

01:23 LAOS Laser Discussion and support: RE: X and Y not toggling with test firmware

After removing the links on XEXT and YEXT I replaced my mbed and pololu boards with new ones.
Now, when using x/y/...

2013-01-02

00:50 LAOS Laser Discussion and support: RE: X and Y not toggling with test firmware

For further information, I think I know what happenned...
I enabled microstepping on my Pololus by connecting the ...

23:34 LAOS Laser Discussion and support: X and Y not toggling with test firmware

Using laos_iotest_board_LPC1768.bin without any Pololu stepper drivers attached, if I hold 'x' or 'y' I see:
Test ...