Forums » Discussion and support »
How to connect PWM on the HPC_July_2012_power_supply rev3 board
Added by pieterb about 12 years ago
Hi there i am still a bit puzzled how to connect te PWM function on my rev3 board
the wiki tells me
J37.1 (Exhaust enable C). Remove original Blue wire and connect it to J37.2 (Exhaust enable E). The blue wire supplies 5V to the potentiometer.
[[http://redmine.laoslaser.org/projects/laos/wiki/HPC_July_2012_power_supply]]
So this is what i have now
And this is what it should be for the PWM functionality right ?
Any info would be welcome :-)
setupwithoutpwm.jpeg (104 KB) setupwithoutpwm.jpeg | Setup without pwm | ||
setupwithpwm.jpg (106 KB) setupwithpwm.jpg | Setup with pwm |
Replies (2)
RE: How to connect PWM on the HPC_July_2012_power_supply rev3 board - Added by hugomeiland almost 12 years ago
Hi Peter,
any progress on this one? I have a working PWM setup, so I may be able to answer more specific questions...
Hugo
RE: How to connect PWM on the HPC_July_2012_power_supply rev3 board - Added by pieterb over 11 years ago
Hi Hugo
Sorry for my late response ;-)
Still have to revisit this but at the moment a low prio