Project

General

Profile

Actions

Feature #20

closed

Provision for power meter

Added by KalleP almost 12 years ago. Updated over 11 years ago.

Status:
Closed
Priority:
Low
Assignee:
-
Category:
Mainboard
Target version:
Start date:
2012-07-27
Due date:
% Done:

0%

Estimated time:

Description

An analogue input for reading the laser current is a good idea and with an analogue input for a optical power sensor
it would give feedback.
It could be used to check for tube health and calibrating the power control PWM after a warm up period or between jobs.

It would allow for remote diagnostics one day

Actions #1

Updated by peter almost 12 years ago

There is one analog in available. However: I would reccommend a custom board with o2c or can bus and amplifier.

Could do visible optic sensor, purple sensor or thermal power meter (peltier?).
Maybe also integrate io for flow sensor an laser pump relay.

Please draft a spec. Perform some tests.

Actions #2

Updated by Anonymous almost 12 years ago

  • Category set to Mainboard
Actions #3

Updated by jaap almost 12 years ago

  • Status changed from New to Resolved
Actions #4

Updated by jaap almost 12 years ago

  • Target version set to Laos Mainboard Rev4
Actions #5

Updated by jaap over 11 years ago

  • Status changed from Resolved to Closed
Actions

Also available in: Atom PDF