Firmware » History » Revision 3
Revision 2 (bartb, 2012-08-13 22:39) → Revision 3/29 (peter, 2012-08-13 22:56)
h1. LAOS firmware h3. Firmware The "Firmware":/index.php/Firmware is the code that controls the motor and laser. It is installed on the mainboard. Installation of the firmware on the controller, and configuration of the firmware for your system is described "here":/index.php/Config.txt_this. To test the hardware, a separate test program is written. Its use is described "here":/index.php/Mainboard_Rev2#Testing_the_board The firmware uses a simple instruction language that is described "Here":/index.php/SimpleCode. These instructions are used to instruct the laser to move, cut and mark. h3. Download compiled versions The compiled firmware file is here (save to your MBED): p(((. https://tuxic.nl/laos/firmware/mbed/laoslaser/laoslaser_LPC1768.bin The configuration files are here (download, modify for your machine, and save on MBED as *config.txt*): MBED): p(((. https://tuxic.nl/laos/firmware/config