Project

General

Profile

Install firmware and verify proper operation » History » Version 1

jegb, 2015-12-18 09:26
first version of instructions

1 1 jegb
h1. Install firmware and verify proper operation
2 1 jegb
* Connect mbed via usb to your laptop, when it mounts, copy [[https://github.com/LaosLaser/Firmware/blob/master/iotest-2015-09-16.bin]] on the mbed drive.
3 1 jegb
* Unmount the mbed drive, and then [[test io ports]] looking at the console terminal for feedback
4 1 jegb
* Once the io works fine, replace the bin file with the latest build [[https://github.com/LaosLaser/Firmware/blob/master/laoslaser-2015-03-18.bin]], remember to save raw file, do not right click "dowload as", took me 1 day to figure out.
5 1 jegb
* Boot up and installation of firmware is done. 
6 1 jegb
7 1 jegb