K40-III Material Settings » History » Revision 1

Revision 1/7 | Next »
darrenp, 2012-12-03 15:52

K40-III Material Settings¶

	Speed	Power	Speed	Power
Material	Cut vector		Engrave raster
Acrylic 2mm		100	200	21
Acrylic 3mm	6	100	200	21
Acrylic 4mm		100	200	21
Acrylic 5 mm	3	100	200	21
Acrylic 10 mm	1	100	200	21
Triplex 1,5 mm	8	100	200	17
Triplex 3 mm	5	100	200	17
Triplex 4 mm		100	200	17
Triplex 5 mm	2	100	200	17
Triplex 6 mm	1	100	200	17
MDF 3 mm	5	100	200	25
MDF 4 mm	4	100	200	25
MDF 6 mm		100	200	25
Corr. Cardboard 3 mm	12	100	200	20
Hardboard 3 mm	3	100	200	20
Paper	20	20	200	15
Card	25	40	200	20
Mount Board	12	100	200	20
Engraving Laminate	15	80	200	21
Funky Foam	25	25	no engrave

Files (0)