LAOS Laser

h1. Materials and settings

Table for LS3020 from HPC

Cut frequency always 500, for perspex (=acrylic) 5000 

|_. *Material*|\2=.*Cut*

vector|\2=. *Engrave*

raster|

|_.|_. Speed|_.Power|_. Speed|_.Power||

|Acrylic 2mm|_.|=.100|=.21|=.200|

|Acrylic 3mm|=.6|=.100|=.21|=.200|

|Acrylic 4mm|_.|=.100|=.21|=.200|

|Acrylic 5 mm|=.3|=.100|=.21|=.200|

|Acrylic 10 mm|=.1|=.100|=.21|=.200|

|Triplex 1,5 mm|=.8|=.100|=.17|=.200|

|Triplex 3 mm|=.5|=.100|=.17|=.200|

|Triplex 4 mm|_.|=.100|=.17|=.200|

|Triplex 5 mm|=.2|=.100|=.17|=.200|

|Triplex 6 mm|=.1|=.100|=.17|=.200|

|MDF 3 mm|=.5|=.100|=.25|=.200|

|MDF 4 mm|=.4|=.100|=.25|=.200|

|MDF 6 mm|_.|=.100|=.25|=.200|

|Corr. Cardboard 3 mm|=.12|=.100|=.20|=.200|

|Hardboard 3 mm|=.3|=.100|=.20|=.200|

|Paper|=.20|=.20|=.15|=.200|

|Card|=.25|=.40|=.20|=.200|

|Mount Board|=.12|=.100|=.20|=.200|

|Engraving Laminate|=.15|=.80|=.21|=.200|

|Funky Foam|=.25|=.25|\2=.no engrave|

Tip:

to get a better result from engraving: slow the speed down