Project

General

Profile

Actions

Step-by-step assembling of the board » History » Revision 1

Revision 1/3 | Next »
hugomeiland, 2013-03-17 20:24


Step-by-step assembling of the board

Since the Laos board has loads of features and possibilities; here is a step-by-step manual for soldering the board and to make sure you use just the right features...

To start, here is the complete schema of the board:

1. power supply to the mbed
2. ethernet
3. i2c bus (display connector)
4. sd-card
5. x-axis
6. y-axis
7. z-axis
8. e-axis
9. limit sensors
10. home sensors
11. exhaust
12. laser enable
13. laser on
14. laser pwm
15. can-bus

Updated by hugomeiland about 11 years ago · 1 revisions