Project

General

Profile

Step-by-step assembling of the board » History » Version 2

« Previous - Version 2/3 (diff) - Next » - Current version
hugomeiland, 2013-03-17 20:42


Step-by-step assembling of the board

Since the Laos board has loads of features and possibilities; here is a step-by-step manual for soldering the board and to make sure you use just the right features...

To start, here is the complete schema of the board:

The best place to start is the sd-card and the sockets for the mbed itself:

1. sd-card and mbed socket

2. ethernet
3. i2c bus (display connector)
4. power supply to the mbed
5. x-axis
6. y-axis
7. z-axis
8. e-axis
9. limit sensors
10. home sensors
11. exhaust
12. laser enable
13. laser on
14. laser pwm
15. can-bus

laos_schema.png View (558 KB) hugomeiland, 2013-03-17 20:24

laos_schema.png View (232 KB) hugomeiland, 2013-03-17 20:25

laos_schema.png View (237 KB) hugomeiland, 2013-03-17 20:26

IMG_1192.JPG View - soldered sd-card socket and mbed sockets (172 KB) hugomeiland, 2013-03-18 10:44