Project

General

Profile

Actions
Copy link

Feature #44

closed

Move SD card postiton?

Added by KalleP about 12 years ago. Updated almost 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
jaap
Category:
Mainboard
Target version:
Laos Mainboard Rev4
Start date:
2012-09-21
Due date:
% Done:

0%

Estimated time:

Description

Not having used the board yet I cannot speak from experience but have a feeling that the SD card should be external from outside if one were to use it to store or transfer jobs.

The CAN bus is more liekly to be used inside the box so I wonder if there is room to move the SD card location next to the UTP and USB connectors on the same edge fo the PCB.

There may be good reason to not have the card removeable but I have not seen mention.

Another workable alternative is to bring the SD card IO pins out to a row of pins compatible with one of the RepRap SD card add-on board that would allo for the connector to be remote mounted, perhaps better and might allow for two cards if there is enough IO for an extra enable pin.

Files

Download all files
_DSC0350.jpg (343 KB) _DSC0350.jpg Ethernet port aligned with cutout david, 2012-09-21 14:14
_DSC0346.jpg (348 KB) _DSC0346.jpg LaOS board mounted with spacers david, 2012-09-21 14:14
_DSC0353.jpg (268 KB) _DSC0353.jpg M3 nuts glued to the back of the mounting plate david, 2012-09-21 14:14
_DSC0346.jpg (83 KB) _DSC0346.jpg Anonymous, 2012-09-21 14:29
_DSC0350.jpg (79.1 KB) _DSC0350.jpg Anonymous, 2012-09-21 14:29
Actions
Copy link

Also available in: Atom PDF