Install firmware and verify proper operation » History » Version 2
jegb, 2015-12-18 09:29
| 1 | 1 | jegb | h1. Install firmware and verify proper operation |
|---|---|---|---|
| 2 | 2 | jegb | |
| 3 | h2. Process |
||
| 4 | |||
| 5 | 1 | jegb | * Connect mbed via usb to your laptop, when it mounts, copy [[https://github.com/LaosLaser/Firmware/blob/master/iotest-2015-09-16.bin]] on the mbed drive. |
| 6 | * Unmount the mbed drive, and then [[test io ports]] looking at the console terminal for feedback |
||
| 7 | * Once the io works fine, replace the bin file with the latest build [[https://github.com/LaosLaser/Firmware/blob/master/laoslaser-2015-03-18.bin]], remember to save raw file, do not right click "dowload as", took me 1 day to figure out. |
||
| 8 | * Boot up and installation of firmware is done. |
||
| 9 | |||
| 10 |