Step-by-step assembling of the board » History » Version 2
hugomeiland, 2013-03-17 20:42
| 1 | 1 | hugomeiland | h1. Step-by-step assembling of the board |
|---|---|---|---|
| 2 | |||
| 3 | Since the Laos board has loads of features and possibilities; here is a step-by-step manual for soldering the board and to make sure you use just the right features... |
||
| 4 | |||
| 5 | To start, here is the complete schema of the board: |
||
| 6 | !laos_schema.png! |
||
| 7 | |||
| 8 | 2 | hugomeiland | The best place to start is the sd-card and the sockets for the mbed itself: |
| 9 | |||
| 10 | 1. sd-card and mbed socket |
||
| 11 | |||
| 12 | |||
| 13 | |||
| 14 | 1 | hugomeiland | 2. ethernet |
| 15 | 3. i2c bus (display connector) |
||
| 16 | 2 | hugomeiland | 4. power supply to the mbed |
| 17 | 1 | hugomeiland | 5. x-axis |
| 18 | 6. y-axis |
||
| 19 | 7. z-axis |
||
| 20 | 8. e-axis |
||
| 21 | 9. limit sensors |
||
| 22 | 10. home sensors |
||
| 23 | 11. exhaust |
||
| 24 | 12. laser enable |
||
| 25 | 13. laser on |
||
| 26 | 14. laser pwm |
||
| 27 | 15. can-bus |