Project

General

Profile

Step-by-step assembling of the board » History » Version 3

hugomeiland, 2013-03-18 10:44

1 1 hugomeiland
h1. Step-by-step assembling of the board
2 1 hugomeiland
3 1 hugomeiland
Since the Laos board has loads of features and possibilities; here is a step-by-step manual for soldering the board and to make sure you use just the right features...
4 1 hugomeiland
5 1 hugomeiland
To start, here is the complete schema of the board:
6 1 hugomeiland
!laos_schema.png!
7 1 hugomeiland
8 2 hugomeiland
The best place to start is the sd-card and the sockets for the mbed itself:
9 2 hugomeiland
10 3 hugomeiland
1. sd-card (U2) and mbed socket
11 3 hugomeiland
parts:
12 3 hugomeiland
|amount|partno.|name||
13 3 hugomeiland
|1|U2|sd-card socket||
14 3 hugomeiland
|2|-|mbed sockets||
15 1 hugomeiland
16 3 hugomeiland
result:
17 3 hugomeiland
!IMG_1192.JPG!
18 2 hugomeiland
19 2 hugomeiland
20 1 hugomeiland
2. ethernet
21 1 hugomeiland
3. i2c bus (display connector)
22 2 hugomeiland
4. power supply to the mbed
23 1 hugomeiland
5. x-axis
24 1 hugomeiland
6. y-axis
25 1 hugomeiland
7. z-axis
26 1 hugomeiland
8. e-axis
27 1 hugomeiland
9. limit sensors
28 1 hugomeiland
10. home sensors
29 1 hugomeiland
11. exhaust
30 1 hugomeiland
12. laser enable
31 1 hugomeiland
13. laser on
32 1 hugomeiland
14. laser pwm
33 1 hugomeiland
15. can-bus